Phone:
(701)814-6992
Physical address:
6296 Donnelly Plaza
Ratkeville, Bahamas.
SUNYO Clod resistant PETG Decoration sheet
About Clod resistant PETG Decoration sheet
If you are worried that the low temperature will make the PETG decorative film on the furniture fall off, then you can cancer it. Because Sunyo PETG Sheet has a very good low temperature resistance, it can be low temperature resistant to -40 ° C. This allows it to maintain excellent physical properties even in high latitude countries. At the same time, custom colors let it meet your various design. Our high-precision equipment makes our tolerances very low, let it fit your machine perfect.
Features of Clod resistant PETG sheet
- Physical properties can be maintained at -40℃
- Stable physical performance
- Custom color and size
| Item | Unit | Typical Value | Test Method |
| Thickness | mm | 0.15-1.5 | |
| Thickness Tolerance | % | 5 | |
| Width | mm | 300-1200 | |
| density | g/cm³ | 1.30±0.02 | ASTM D1505 |
| Average Water Absorption | % | 0.13 | ASTM D570 |
| Hear shrinkage | % | 2.5 | ASTM D955 |
| Tensile Strength at Yield | MPa(kgf/cm²) | 50(510) | ASTM D638 |
| Tensile Strength at Break | MPa(kgf/cm²) | 26(265) | ASTM D638 |
| Elongation at Yield | % | 4.5 | ASTM D638 |
| Elongation at Break | % | 120 | ASTM D638 |
| Flexural Strength 1.27mm/min(0.05inch/min) | MPa(kgf/cm²) | 71(720) | ASTM D790 |
| Flexural Modulus 1.27mm/min(0.05inch/min) | MPa(kgf/cm²) | 2150(21900) | ASTM D790 |
| Deflection Temperature @0.455MPa(66psi) @1.82MPa(264psi) | ℃ | 70 62 | ASTM D648 |
| Haze | % | <1.0 | ASTM D1003 |
| Transmittance | % | 90 | ASTM D1003 |