Phone:
(701)814-6992
Physical address:
6296 Donnelly Plaza
Ratkeville, Bahamas.
High gloss Decorative PETG lamination sheet
High gloss PETG lamination sheet
High gloss PETG decorative sheet is widely used in lamination. PETG is a modification of PET material, so it have many advantage that PET sheet don’t have. For example, PET must be pre-coated first, otherwise PET and the board will not be firmly lamianted. PETG film without primer can be lamianted firmly on MDF with any hot melt glue, which can save costs. In the same way, PETG film also have many advantages of PET film. Like PET, PETG is environmentally friendly and non-toxic. This gives it an advantage as a board surface decoration over paint containing formaldehyde.
Features of High Gloss PETG film
- Without pre-coating, you can directly use hot melt lamination it on the board.
- Ecofriendly and non-toxic.
- Compared with PET, it is easier to adsorb ink, easier to print
| Item | Unit | Value | Test Method |
| Thickness | mm | 0.8-1.0 | |
| Thickness Tolerance | % | 5 | |
| Width | mm | 300-1200 | |
| density | g/cm³ | 1.30±0.02 | ASTM D1505 |
| Average Water Absorption | % | 0.13 | ASTM D570 |
| Hear shrinkage | % | 2.5 | ASTM D955 |
| Tensile Strength at Yield | MPa(kgf/cm²) | 50(510) | ASTM D638 |
| Tensile Strength at Break | MPa(kgf/cm²) | 26(265) | ASTM D638 |
| Elongation at Yield | % | 4.5 | ASTM D638 |
| Elongation at Break | % | 120 | ASTM D638 |
| Flexural Strength 1.27mm/min(0.05inch/min) | MPa(kgf/cm²) | 71(720) | ASTM D790 |
| Flexural Modulus 1.27mm/min(0.05inch/min) | MPa(kgf/cm²) | 2150(21900) | ASTM D790 |
| Deflection Temperature @0.455MPa(66psi) @1.82MPa(264psi) | ℃ | 70 62 | ASTM D648 |
| Haze | % | <1.0 | ASTM D1003 |
| Transmittance | % | 90 | ASTM D1003 |